Subject | Text |
Re: tech tip rca tv itc008fam | [quote:62fa25231c="joseph46"]need tech tip on rca tv model 27r410t chassis itc008fam. won't power up |
can ac adaptor tip be replaced? | Is it possible to replace the tip on the ac adpaptor that plugs into my (dell) laptop? The wires tha |
|
tech tip rca tv itc008fam | need tech tip on rca tv model 27r410t chassis itc008fam. won't power up. voltage drop on secondary s |
For the best tip men... | Hello... I am Jorge from Portugal... I need Help...
I need the cd rom software for a radio...
Is |
Chassis 11AK36A2 PSU Pulsating tip | Pulsating PSU. Check D803 1N4937 |
Re: Repair tip for Viewsonic N3250W or N3235W power supply | Sounds like I keep having to repeat myself ...
[quote:d5074c6e4a="jts1957"]:evil: PEOPLE [n3250] |
TV repair tip | Samsung WS28W63N, believe KS3A chassis with a lime green screen otherwise perfect. Any advice re whe |
Soldering help needed., It don't flow right | I’ve made my first DIY PCB, I’m trying to solder Leds into the holes and I’m a complete newbe, I got |
| I couldn't find CT301 but found CT331 which is the right one according to another thread. By twistin |
37lg3000 | Can anyone help with the sourcing of the above screen found one at local tip with a crack in it. Its |
about code, | thanks for your reply, but i don't have the manual, a tip to piont me in the right direction would h |
| 8) That's cool, I did exactly the same when starting with electronics, altough there wasn't an Ipod |
| can't somebody give me a tip??? |
Emerson TV/VCR problem | I have an Emerson TV/VCR less than a year old that will not come on or power up at all. There is no |
For Sale - Temperature Controlled Soldering Station | Tenma Model 21-147
$50.00
Featuring adjustable temperature and a variety of available tips, th |
Driver info | If its a legacy driver that is not listed on a site try doing a ftp search at the same sites, ftp |
Onkyo DV-C601 "no disc" problem | I copied this information from another website discussion board. I hope it helps.
I too had the |
|
| Have replaced the switches a while back and this seems to have cured the problem, thanks for the tip |
| Minnie i turned down to red bias to -0 of caurse red bleeding has been reduced but not all, on some |
Goodmans TV | Wow thanks Atom for all the advice you have certainly given me a few points to check on, after your |
Citroen factory-fitted Audio System 3030 RDS | Picking up a tip from A N Other, I pressed Preset 1 and 4 and switched on: no change, pressed Preset |
FUJITSU PDS4211E/H Plasma Screen Power Problem | Hi guys,
I have a Fujitsu PDS4211E/H plasma screen which is not well.
When you power on the LE |
Philips Brilliance 181AS LCD TFT monitor with dull display | Hi everyone,
Perhaps someone would be kind enough to offer me some advice... I repair electronic |
I got the 50MP1 service manual and fixed the Plasma TV. | NEC service manuals are hard to find, eventually I got 50MP1 service manual. I got a lot of Panason |
Sony VCR misteriously back to life | Hello everyone, I'm new to this forum, it seems very nice!
I have a question about a sony vcr slv-s |
Toshiba Cx2886C/CX2885C- FAULT IS FIXED-THANKS | I have been able to fix the fault in subject Tv with the friend's tip on EsI. Thankyou very much all |
Test mode | [quote:60ff895aaa="playedataritoday"]I was just given an Viewsonic N3252W to try and repair.
It w |
| I have been waiting for the professionals to post a reply. But until then, perhaps you can benefit f |
| Hi.
This was a very useful tip - thanks :)
Just reparied a set with similar symptoms. Except w |
| :D
I have just tried that and you are absolute wright!
Thanks a lot for the tip it has saved me l |